background image

6

7

DANGER - RISK OF UNSAFE OPERATION

1. Do not use chlorine bleach or any other corrosive compound.
2. Become familiar with the operation and controls of the pressure washer.
3. Keep operating area clear of all persons, pets, and obstacles.
4. Do not operate the product when fatigued or under the influence of alcohol or drugs.

Stay alert at all times.

5. Never defeat the safety features of this product.
6. Do not operate machine with missing, broken, or unauthorised parts.
7. Never leave the spray lance unattended while unit is running.
8. If engine does not start after two pulls, squeeze trigger of gun to relieve 
pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to

avoid kickback and prevent hand or arm injury.

9. Keep children away from the pressure washer at all times.
10. Do not overreach or stand on an unstable support.
11. Do not use pressure washer while standing on a ladder.
12. Grip gun/wand firmly with both hands. Expect the gun to kickback when triggered.

DANGER - RISK OF INJURY FROM SPRAY

1. Always wear approved safety glasses.Wear protective clothing to protect against 
accidental spraying. 
2. Never point spray lance at, or spray people or animals.
3. Always secure trigger lock when wand is not in service to prevent accidental 
operation.
4. Never permanently secure trigger in pull back (open) position.

GENERAL SAFETY RULES

AU

TECHNICAL SPECIFICATIONS

AU

TECHNICAL INFORMATION

SPECIFICATION

FH2700/FH2701

ENGINE TYPE

Air cooled, 4-cycle, Chrome Cylinder

ENGINE/MOTOR

6.5HP OHV

PUMP TYPE

Annovi (RMV 25G27)

RATED PRESSURE

186 Bar (2700 PSI)

MAX. NOZZLE PRESSURE

220 Bar (3200 PSI)

FUEL TANK CAPACITY

3.6 Litres

OIL CAPACITY

0.6 Litres

WATER FLOW

9.3 L/M

WHEELS

8 inch rubber wheels

HOSE LENGTH

7.5 metres

SPRAY NOZZLES

5 Quick Connect Tips (Max 0

O

, High 15

O

, General 25

O

Delicate 40

O

, Detergent 65

O

)

SPRAY GUN

Stainless Steel

QUICK CONNECT

Yes

WEIGHT

36.5kg / 38kg

Summary of Contents for FH2700














Reviews: