TW5210 User Manual rev 1_2
10
©2011 Tallysman Wireless, Inc.
Confidential
RMC Decimal Digits:
Sets the number of decimal digits output for lat and long. The
default is 5 but can be changed to 3 or 4
1PPS DOP
: Not applicable for the TW5210 USB version
1PPS Qual Stop Delay
: Not applicable for the TW5210 USB version
1PPS Qual Start Delay
: Not applicable for the TW5210 USB version
1PPS Width
: Not applicable for the TW5210 USB version.
Default 2D DOPS
: These are the maximum allowable values for calculating a 2D fix.
The default values for PDOP, VDOP, HDOP are 15,12,12
Default 3D DOPS
: These are the maximum allowable values for calculating a 3D fix.
The default values for PDOP, VDOP, HDOP are 15,12,12
Startup 2D DOPS
: Set these values the same as the default 2D DOPS
Startup 3D DOPs
: Set these values the same as the default 3D DOPS
5.2
Read/Write
Select
Program/Read
to read the parameters in the TW5210
To write a new set of parameters to the TW5210 select
Program/Write
The configuration file can be save by selecting
File/Save
Note: Configuration parameters changes do not take effect until the TW5310 is reset i.e.
power cycled.
