background image

User guide

Troubleshooting

105

Additional display messages 

These are not error messages, they give operating instructions and 
information from the printer to the user.

If messages appear which are not described here, please con-
tact your customer service representative with exact details of 
the message.

Message

Possible cause

Corrective action

`

To proceed press any key.

The factory-set parameters are 
loaded and are written into all 
menus.

`

No action required.

Functions which have no meaning 
in this emulation have been selec-
ted.

`

For this function please switch 
to the appropriate emulation in 
the menu, see 

Selecting Proto-

col (emulation)

 (page 51).

You are informed when the fanfold 
paper is in the park position.

`

No action required.

Note for the operator to tear off the 
paper automatically positioned at 
the tear off edge.

`

Tear paper off.

Paper is not available in the selec-
ted paper path (… indicates the 
active paper path). Data is in the 
interface receiver buffer.

`

Load paper, see section 

Loading paper

 (page 28)

Press any key

Loading Default

Only available
in Epson Mode

Park position

Tear paper off

Load paper from
...

Summary of Contents for LA550N


















































































































































Reviews: