TallyGenicom 6605, User Manual

Page: 76 / 212

76
Chapter 4
Config Menu
Code 7F
This parameter allows you to dictate how the printer will react when it receives
a Hexadecimal code 7F. The default value depends on the emulation.
(See the Emulation Parameter, page 54.).
•
Ignore. The code is ignored.
•
Delete Char (default). The previous character is deleted.
•
Delete Buffer. The previous characters on the current print line are
deleted.
•
Space. A Space character is substituted.
•
Fill. A Fill character is substituted.
Print 80 to 9F Hex
This parameter defines whether locations 80 through 9F Hex are to be treated
as control characters or printable characters. The function of the control
characters in this area depends on the emulation. The selections are ON
(printable characters) or OFF (control characters). The default value depends
on the emulation.
Ignore Char
This parameter allows you to select a character that will be ignored in the
incoming data stream. This parameter functions in all emulations and
nondownloadable print modes. It does not function in plot mode, font
download, or VFU download. Selections are 0-255, referring to the decimal
value of any 8-bit character, or OFF. Default is OFF.
Sub Char From
This parameter allows you to select a character that will be replaced by the
character designated by the Sub Char To parameter. This parameter
functions in all emulations and non-downloadable print modes. It does not
function in plot mode, font download, or VFU download. Default is OFF.
Sub Char To
This parameter allows you to select the character that will replace the
character designated by the Sub Char From Parameter. This parameter
functions in all emulations and non-downloadable print modes. It does not
function in plot mode, font download, or VFU download. Default is OFF.
PTX SFCC
Defines the Special Function Control Character used by the Printronix P5000
emulation. The decimal value of the ASCII character code is entered. The
default value is 1 (SOH).