Single sheets
Paper handling
24
`
Single sheets
1.
Tear off printed paper at its per-
foration, if necessary.
2.
Press the
PARK
key. The fanfold
paper is transported backward to
the park position.
3.
Move the paper select lever back-
ward to Single Sheet position.
4.
If necessary, readjust the print
gap lever for single sheets (see
section “Print gap lever” on
page 20).
5.
Raise the single sheet feeder until
it locks into its mounting.
6.
Align the left paper guide with
the mark on the left of the single
sheet feeder. Adjust the right
paper guide to the width of the
paper used.
QSG2440_en_396957-.book Seite 24 Donnerstag, 28. Februar 2008 12:03 12
