Settings
This section describes how to set the tear position, the first printing line, the print head gap as
well as the font selection and the character density.
➤
Setting the tear
position
If the tear position of the paper is not aligned with the tear edge of the top cover of the printer,
you can adjust it.
Press the
Setup
key. The printer changes to setup mode.
Press the
Adjust
(2) key.
Press the
Tear
(4) key. The printer performs a form feed.
Press the
<
(2) or
>
(3) key to move the perforation to the desired position. Confirm
the input by pressing the
Set
(1) key.
Confirm the input again by pressing the
Setup
key. The printer is reset to the initial
status.
The correction made – a maximum of approx. 2.5 cm (1") in each direction – will be retained
after switching the printer off.
Adjust
Paperway
Menu
Char
Online
Setup
2
1
3
4
TOF
Head
Tear
Online
Setup
2
1
3
4
TearAdj= 0/72" *
Set
<
>
Exit
Online
Setup
2
1
3
4
Settings
Quick start guide
22
