Tally T2265plus, User Manual

Page: 97 / 196

User guide The Menu
87
Line length (Width)
Selects the line length in inches. With the setting of 8 Inch , the print-
er operates like a printer with a width of only 8 inches.
Press Width (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 8 Inch, 13.2 Inch, 13.6 Inch
Default Setting: 13.6 Inch
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Barcode (Barcode)
With this function selected it is posible to print different barcodes and
LCP (Large Character Printing).
Press Barcode (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: On/Off
Default Setting: Off
The definition and activation is performed by special sequences
through the interface. Since this selection is possible for all emula-
tions it must be noted that conflicts in sequence conformity with the
selected emulation may occur. For this reason the barcode function
can also be switched on and off by MTPL sequences. (The possible
barcodes, LCP characters and the operation of these functions are
described in the
Barcode Programmer’s Application Manual ).
Confirm the setting by pressing the Set key (1).
Width
Online
Setup
2 1 3 4
Back Next
Width=13.6Inch *
Online
Setup
Set < > Exit
2 1 3 4
Barcode Barmode
Online
Setup
2 1 3 4
Back Next
Barcode=Off *
Online
Setup
Set < > Exit
2 1 3 4