Tally Dascom T2265+, User Manual

Page: 76 / 196

The Menu User guide
66
Setting character density
(CPI)
Sets the characters per inch (character pitch). The higher the pa-
rameter the smaller the character spacing.
Press CPI (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 5 CPI, 6 CPI, 7.5 CPI, 8.6 CPI, 10 CPI,
12 CPI, 15 CPI, 17.1 CPI, 20 CPI
Default Setting: 10 CPI
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Setting line spacing (LPI)
Sets the lines per inch (line density). The higher the parameter the
smaller the line spacing (random LPI can be selected via the ESC
sequences).
Press LPI (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 2 LPI, 3 LPI, 4 LPI, 6 LPI*, 8 LPI, 12 LPI
Default Setting: 6 LPI
Confirm the setting by pressing the Set key (1).
Font CPI
Online
Setup
2 1 3 4
Back Next
10 CPI *
Online
Setup
Set < > Exit
2 1 3 4
LPI Skip
Online
Setup
2 1 3 4
Back Next
6 LPI *
Online
Setup
Set < > Exit
2 1 3 4