Tally Dascom DL-820
User Guide V1.0
22
2.5.2 Adjust the media thickness and width
It is important to set correct thickness and width for media to improve the print quality.
When every printout is poor in quality, the thickness is incorrect.
When the printout is poor only on one side, the width is incorrect.
When printing on thick media like tags, test the print quality with incremental thickness
values.
After replacing different size media or direct thermal media, test print quality with
incremental width values.
（
1
）
Adjust the media thickness
Above are just recommended settings for different media. Verify the setting with your test
results.
The ex-factory setting is 1-2. (The default thickness for general labels.)
Please note that the combination of media thickness and hardness of the media may
cause slight variation.
Adjusting the thickness may resolve the problem of wrinkled ribbon.
Recommended
Dial Positions
Media
1-2
Direct thermal rolls, general labels
3-5
Labels with thick liner
6-9
Thick media like tags or tickets
