manualshive.com logo in svg

Talkswitch TS-850i, User Manual

Share
Download
Talkswitch TS-850i User Manual Download Page 12

E V E R Y   C A L L   C O U N T S

1 1

4. See 

Local Extensions/Fax

 in Help within the 

TalkSwitch management software, for instructions on 
configuring direct line access, hunt group 
permissions, caller ID settings (VoIP only), call 
handling and voicemail.

5. After configuring the extensions, choose 

File > 

Save

. The TalkSwitch system will automatically 

configure each handset.

Configuring the TS-850i for use outside the office

An external IP extension is located outside the office 
(e.g. an office phone within the home), and connects to 
your TalkSwitch system over the Internet. The 
TalkSwitch system must be equipped with a VoIP module.

Warning:

 Calls to an emergency service number using 

an external IP extension will not send the correct 
address to the emergency operator. We strongly 
recommend that you apply a warning label to any 
external IP extension stating:

If an emergency call is made from this phone, you 
must provide your address to the emergency operator.

Summary of Contents for TS-850i


















Reviews:

No comments

Brands by name

Popular brands

Load more brands