VOIP-500
Series Phone
Quick Installation Guide
Page
5
of
6
Rev. 2/4/14
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
VII. Earth Ground
The faceplate of the phone must be connected to earth ground. Install a #10 ring terminal to the ground
wire before connecting it to the earth ground terminal on the rear of the faceplate as shown in
Figure 2
.
VIII. Auxiliary Input / Output
1. The
VOIP-500 Series Phone
has three (3) Auxiliary Inputs (dry contact, 10 mA @ 8 VDC) and
three (3) Auxiliary Outputs (dry contact, 120 mA @ 120 VAC/DC). Auxiliary Outputs allow
peripheral equipment such as strobe lights, PTZ cameras, door entry systems, etc. to be
activated when the push button is pressed.
2. Two (2) removable 6-pin connector plugs are provided for the auxiliary input and output as shown
in the
Figure 6
.
3. The Auxiliary Input and Auxiliary Output connections are as follows:
Auxiliary Input Connection
Connector Plug Pin Position
Aux. Input 1
Position 7 and 8
Aux. Input 2
Position 9 and 10
Aux. Input 3
Position 11 and 12
Auxiliary Output Connection
Connector Plug Pin Position
Aux. Output 1
Position 1 and 2
Aux. Output 2
Position 3 and 4
Aux. Output 3
Position 5 and 6
Use a two conductor, No. 28 to 16 AWG cable size for all auxiliary connections.
Figure 6
- Auxiliary Input/Output and Power connectors