VOICE OVER IP INTERFACE
Installation and Operation Manual
18
calls will be directed. Please reference the Phone Book Design section (p. 18) for information
and examples on how to program the phone book.
15. Changing user name and password (Web GUI only. See p. 38 for instructions on the
Windows GUI). Go to Change Password. Specify the User Name that you would like to use
for this VOIP unit.
If an Old Password exists, enter that password. Now proceed with assigning a New Password
and then Reconfirm Password.
16. Save configuration changes. Go to Save Setup | Save and Reboot. Click OK. This will save
the parameter values that you have just entered. The VOIP-1-2-4-8’s “BOOT” LED will light up
while the configuration file is being saved and loaded into the VOIP-1-2-4-8. Don’t do anything to
the VOIP-1-2-4-8 until the “BOOT” LED is off (a loss of power at this point could cause the VOIP-
1-2-4-8 unit to lose the configuration settings you have made).
