EC-6
Installation and Operation Manual
Page
5
of
10
Rev. 08/24/2023
Copyright 2020-2023 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, and WEBS are registered trademarks of Talk-A-Phone, LLC. All rights reserved. All other
trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement, sponsorship, or affiliation with such
owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
3.3. Programming the Security Code
The security code allows the user/installer to program the
EC-6
while
DIP Switch #3
is in the
OFF
(normal operation) position. A 6-digit number is used to access programming mode.
The security code has been factory set to
845464
. It is recommended that you change the security code
to your own 6-digit number as follows:
Step 1.
Access programming as outlined in
Section 3.2, Accessing Programming Mode
.
Step 2.
Enter your new security code followed by
#47
.
Step 3.
To exit programming simply hang up the phone.
IMPORTANT NOTE:
The security code must be six (6) digits in length and
MUST NOT
contain
a * or #.
3.4. Quick Programming Features
Description
Enter Digits
+ Location
Default Ring Assignment (factory set to cleared)
none or 1-digit (0-6)
+ #44
Ring count (factory set to 9 rings)
1-digit (0-9)
+ #45
Number of Emergency Phones (factory set to 6)
1-digit (1-6)
+ #46
Security Code (factory default = 845464)
6-digits (0-9)
+ #47
Disable Dial 9 Toggle Feature (factory default)
*0
Enable Dial 9 Toggle Feature
*1
Exit Programming and Disconnect
##7
Reset All Programming to Factory Default Settings
###
