Talk-a-Phone WEBS-CM-2, Configuration And Operation Manual

Page: 53 / 53

WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page 53 of 53
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
Appendix D: Network Port Requirements
The network for communications module Series communications modules should allow the following:

IPv4 enabled

Allow the following protocols:
o
RTP
o
HTTP/HTTPS
o
SMTP

Routed network

DHCP Server (Optional)
Network elements :

Layer-2 Switch

WEBS Contact Server
Ports:
The following ports needs to be enabled on the communications module Series communications modules and
allowed across the firewall and routers in the network.
Service/Module Port Port Type Mode
HTTP 80 TCP/UDP Inbound
FTP 21 TCP Inbound
SSH 22 TCP Inbound
Paging 5000 UDP Inbound
STUN 3478 UDP Inbound/Outbound
WEBS Contact Port 3001 UDP Inbound/Outbound
SMTP Server Port 25 TCP/UDP Inbound/Outbound