HS-RF-1 Wireless Headset System Installation Instructions
Copyright 2009 Talk-A-Phone Co. All rights reserved.
Talk-A-Phone
Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714-3804
Page 3 of 5
Phone 773.539.1100 • Fax 773.539.1241 • [email protected] • www.talkaphone.com
All prices and specifications are subject to change without notice.
Talk-A-Phone, Talk-A-Lert, Scream Alert and WEBS are registered trademarks of Talk-A-Phone Co.
V. Setting the Intellistand feature and the Configuration Dial
Set the intellistand switch in the up position and then adjust the Configuration Dial with the number “1” aligned
to the position indicator.
VI. Using the Wireless Headset System
Powering up the Headset:
If the Headset battery is charged and the base is connected to the power, the headset is automatically on.
To talk, press the talk control button on the Headset and speak into the microphone.
Muting talk mode:
Push the mute button to activate mute, push in again to de-active. (You will hear a slight beep in the speaker
when mute is activated and then every 15 seconds).
Adjust Listening Volume:
During conversation, adjust the listening volume by using the listening volume switch on the back of the
base. Factory default is kept mid range.
