TALEX Spółka z ograniczoną odpowiedzialnością Sp. K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26
by email.
The Instruction Manual
LEO 320 PROFESSIONAL shredder
Page
18
of
37
6.1
Adjustment of the belts tension
Fig. 3 Shredder drive diagram
The adjustment of the transmission drive belts tension is done with the machine turned off
and the vehicle engine switched off. Refer to Fig. 4. The optimal tension of the belts – under
the pressure of 100N (10kG) the belt bends 1.5 - 2.5 cm. The successive activities need to be
carried out in the following manner:
1.
First, loosen the bolts holding the transmission
2.
Remove the belt transmission shield,
3.
Check the condition and tension of the V-belts (replace the damaged ones with new),
4.
Loosen the nut (1),
5.
Tighten the bolt (2) checking the tension of belts,
6.
Secure the bolt with the lock nut,
7.
Tighten the nut (1),
8.
Install the metal transmission shield,
9.
Tighten the transmission bolts.
ATTENTION!!!
To ensure the correct performance of the transmission, tighten the belts
simultaneously for each side.
1 - jointed telescopic shaft, 2 -
angular transmission,
belt transmission
shaft
