FLASk CLAMPS
P
latforM
P
art
D
esCriPtion
M
aterial
C
aPaCity
n
uMber
10mL Erlenmeyer Flask Clamp
stainless steel
35
980078
25mL Erlenmeyer Flask Clamp
stainless steel
20
980079
50mL Erlenmeyer Flask Clamp
stainless steel
15
980080
125mL Erlenmeyer Flask Clamp
stainless steel
12
980081
250mL Erlenmeyer Flask Clamp
stainless steel
6
980082
500mL Erlenmeyer Flask Clamp
stainless steel
4
980083
500mL Media Bottle Clamp
stainless steel
3
980092
125mL Erlenmeyer Flask Clamp
PVC
12
980428
250mL Erlenmeyer Flask Clamp
PVC
6
980429
500mL Erlenmeyer Flask Clamp
PVC
4
980430
a
CCessories
tESt tuBE rACkS
t
ube
P
latforM
P
art
D
esCriPtion
C
aPaCity
C
aPaCity
n
uMber
10 to 13mm Test Tube Rack
63
2
980193
14 to 16mm Test Tube Rack
48
2
980194
18 to 20mm Test Tube Rack
35
2
980195
22 to 25mm Test Tube Rack
24
2
980196
15mL Centrifuge Tube Rack
42
2
980198
50mL Centrifuge Tube Rack
12
2
980199
1.5 to 2mL Micro-Tube Rack
70
2
980191
installation of Flask Clamps - orbital Shaker
1. Unit should be in standby mode.
2. Remove non-skid rubber mat.
3. Line up the hole(s) in the flask clamp to the hole(s)
in the tray. Using the screw(s) provided, hand
tighten into place using a flathead screwdriver.
do not over tighten.
4. Insert flask/media bottle into clamp and wrap the
spring around the neck of the clamp to hold secure.
not for use with the Microplate Shaker.
installation of test tube racks - orbital Shaker
1. Unit should be in standby mode.
2. Remove non-skid rubber mat.
3. Align the clip on the rack to the right side of the tray.
4. Line up the holes in the test tube rack to the holes in the tray. Using the screws
provided, hand tighten into place using a flathead screwdriver. do not over
tighten.
installation of 1.5 to 2mL Micro-tube rack - Microplate Shaker
1. Unit should be in standby mode.
2. Align the Micro-Tube Rack side-to-side on the
tray.
3. Press the Micro-Tube Rack in place, you will
hear the Micro-Tube Rack clip into position. No
mounting screws are required.
13
