Talaris ntegra 177-0800, User Manual

Page: 51 / 66

Ntegra Functions
TP05413021 Interim Page 43 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
To enter the ID Setting feature, press the 5 key on the numeric keys.
Using the numeric keys, enter the required ID number. Press the ENTER key to
store the ID number to memory.
To remove an ID number, enter the ID Setting feature and press the ENTER key
with the display blank.
5.1.6 End Of Day
This feature allows the User to view or print ( if a printer is installed and enabled )
currency totals stored in memory.
To enter the End Of Day feature, press the 6 key on the numeric keys.
The display will initially show the current day and currency totals.
Date
An arrow to the side of the date will indicate that data is stored for additional
dates. Press the appropriate navigation key ( LEFT or RIGHT ) to access the
data for other dates.
Currency
A totals table is available for all registered currencies.
Note:
There may be more currencies registered in the firmware than active
counting currencies loaded in the Ntegra.