background image

Cleaning: Unplug the adaptors, clean it with wet cloth. To protect the surface, do not use any 

                   detergent or dissolved liquid.

 Power supply: Make sure the power supply is within the required limit, too high or too low will 

                   affect the performance. Please place the batteries into the transmitter according to 

                   correct polarity.

Maintenance: If there are any troubles of the system, please contact your local distributor for 

                   maintenance. Please do not dismantle the products as it will void warranty and harmful 

                   to yourself.

Accessory: please use the accessories supplied by manufacturer or recognized accessories to exert 

                    the best performance.

Warranty:  Any dismantling without authorization may lead to cancellation of the warranty.

Do not keep or use the system in high humidity, high electromagnetic or high temperature 

environment, please take out the batteries if you don’t use it for a long time.

17

   Trouble Shooting 

* If there are other troubles, please contact us or your local distributor or retailer. Please do not dismantle 
   the product as it will void warranty.

    

Running out of batteries or bad connection between 
receiver and power supply

   Troubles

Possible reasons

No indication on transmitter and receiver

No RF signal on receiver

With RF signal, but without audio signal 

Background noise of audio signal is too loud

Audio signal distortion

Operating distance is too short, signal is not 

stable

Frequency of  transmitter and receiver is not the 
same or out of operating range

Microphone switch is set in the middle, mute state

Output level of receiver is too low; there is 
interference signal around

Transmitter’s modulation frequency deviation is too 
high; Output level of receiver is too high 

Receiver antenna is wrongly placed; there is a strong 
electro-magnetic interference around

Usage and Maintenance!

一.目录........................................................................................................... 2

二.产品特点 ................................................................................................... 3

三.接收机功能 ............................................................................................ 3-5

四.操作方法 /调校注意................................................................................. 5-6

     如何正确使用手持麦克风 

     如何正确使用接收机

     同一地点正确使用多套无线麦克风 

五.数码显示面板操作说明 ............................................................................ 6-7

六.故障现象/故障原因/使用、保存.......................................................................8

七.各部件指标/包装清单 ...................................................................................9

目录

2

No response of the buttons 

“LOC” shows in the LCD when pressing the buttons, 
please long press

 

“SET” to unlock

Summary of Contents for UHF











Reviews: