3
2
Trouble Shooting:
Troules
Possible reasons
No RF signal on receiver
Frequency of transmitter and
receiver is not the same or out
of operating range
With RF signal, but no audio
signal
Microphone is not connected or
squelch level of receiver is too high
Background noise of audio
signal is too loud
Frequency deviation is too low;
output level of receiver is too low;
check if there is an interfering signal
Audio signal distortion
Frequency deviation is too high;
output level of receiver is too high
Operating distance is too
short, signal is not stable
Transmitter is set at low power;
squelch level of receiver is too
high; receiver antenna is wrong
placed; there is a strong
electro-magnetic interference
If there are other troubles, please contact us or your local
distributor or retailer. Please do not dismantle the products
as it will void warranty.
6 7 8
(6) Infra-red data
synchronization window:
send frequency signal
to transmitters by pressing
“SET” on receiver.
(7) Lock switch: if it is set at
“ON” position, the power
switch is locked and can
only be used for mute
function.
(8) Power adjusting switch:
choose high or low transmit
power.
5
(5) Battery compartment: put in
2pcs AA batteries.
1.How to use handheld microphone:
(1) Hold the middle part of microphone. If the hand is too close
to the wire mesh, the sound will be influenced; if the hand
is too close to the antenna at bottom, the operating distance
will be shortened.
(2) By changing the distance between microphone head and
mouth, the sound volume will be increased or reduced.
Summary of Contents for TS-8807
Page 2: ......
