-20
-30
-40
-50
-60
(dBV/Pa)
20
2K
20K
50
100
200
500
1K
5K
(Hz)
Frequency Response Graph
Uni-directional
(at 1kHz)
0
30
60
90
120
150
330
300
270
240
210
180
Frequency Response Graph
Connecting And Disconnecting The Microphone Cable
Operation
How To Use Switch
Usage
Professional
Recording
Microphone
TAKSTAR SM-7B is a professional condenser microphone
for recording which adopts advanced SMT, precision
control circuit with Pressure Gradient Transducer cartridge
and a large vapor-deposited gold diaphragm to achieve
high sensitivity, extended frequency response, no crossover
distortion and low self noise.
The Zinc-die casting housing is spray printed. Its standard
XLR (F) connector matches all kinds of audio equipment.
SM-7B is tailored for broadcasting, television studios,
recording studios, stage performances, etc.
Specification
Element: Pressure Gradient Transducer
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Sensitivity: -37dB±2dB (0dB=1V/Pa at 1kHz)
Output Impedance: 1
00Ω±30% (at 1kHz)
Max. Input SPL: 130dB (at 1kHz
≤
1% T.H.D)
S/N Ratio: 22dB
Low Frequency Attenuation: 100Hz/oct 10dB
Phantom Power Requirement: 48V DC
1
.
Insert the XLR connector into the microphone. If necessary, rotate the
connector to align the key on the connector and the groove in the
microphone. Push the connector into the microphone until it clicks.
2
.
To disconnect the cable and microphone, grasp the connector while
depressing the tab. Pull the connector away from the microphone.
PHANT OM POWER
SUPPL IER
XL RF
XL RF
XLRM
VOI CE AMPL IFI ER,
MI XER,
POWER AM PLIF IER
A. Low frequency attenuation:
“ ” no attenuation;
－
it can balance the low frequency rising effect of short distance
“ ”
pickup and reduce the feedback as well as protect from howling;
B. Sensitivity attenuation:
0 no attenuation;
“ ”
-10dB” it fixes the sensitivity on –10dB level, shortens the pickup
“
distance, eliminates the noise: this function is usually used for high
SPL and large dynamic pickup occasions (i.e. the pickup of low
frequencies of small instruments of symphony orchestra).
1. Turn on your amplifier or mixing board and set the volume control to
minimum position, To connect the phantom power to the microphone
turning on the phantom switch, accommodate the volume control from
low to high so obtained effect to your moderate level for protected the
sauna from pounding.
2. If the head of the microphone is covered by hand or brought close to the
speaker, a howling sound may be generated. To prevent this, first decrease
the volume, then place the microphone so that it is not pointed to the
speaker and that there is a sufficient distance between the microphone
and speaker.
3. The sensitivity of cartridge is very fine, Don't do drop. Hit it or apply
strong shock to it.
4. To maintain the sensitivity and quality of sound reproducing, avoid exposing
it to moisture and extreme temperatures.
※
The related specification or deployment are subject to change without any
prior notice.
※
For additional information about service or parts, please contact your local
authorized Takstar Service Center or visit Takstar at www.takstar.com.
Guangdong Takstar Electronic Co.,Ltd.
Address: No. 2 Fu Kang YiRd.,Longxi Boluo Huizhou Guangdong, 516121 China
International Sales:
Tel: +86 752 6383644 Email:
Website: www.takstar.com
sales
@
takstar.com
Product
Contents
Microphone
1pc
Windscreen
1pc
Shock
Mount
1pc
Phantom
Power
1pc
Audio
Connecting
Cable
1pc
Power
Adaptor
1pc
A
B
