Takstar SM-18 EL, User Manual

Page: 15 / 20

14
② Connection for audio device without built-in 48V phantom power:
5. Fix the connection cable onto the mic stand or boom arm, and leave a section/
loop of cable at the mic. This helps to effectively isolate the vibration.
6. Please turn the volume to the minimum on the audio device before switching
on the phantom power. Then gradually increase the volume to an appropriate
level. This helps to prevent speaker damage by high sound pressure. Keep a proper
distance between the mic and the speakers to avoid feedback howling.
7. The mic output uses a three-pin XLR male connector, as shown below:
Female XLR to 3.5mm
Audio Cable
Audio Interface
48V Phantom
Power
Male/Female XLR Cable
Pin 2 (+)
Pin 1 (ground)
Pin 3 (-)
SM-18 EL
PROFESSIONAL RECORDING MICROPHONE