-2 0
-3 0
-4 0
-5 0
-6 0
-7 0
20
50
100
200
500
1k
2k
5k
10k
20k
M i c r o p h o n e F r e q u e n c y R e s p o n s e d B R e f . 1 V / P a
1
3
2
4
5
6
7
1 2 5 H z
5 0 0 H z
1 0 0 0 H z
2 0 0 0 H z
4 0 0 0 H z
8 0 0 0 H z
1 8 0°
15 0°
12 0°
9 0°
6 0°
30°
0°
2 1 0°
2 7 0°
2 4 0°
3 0 0°
3 3 0°
Cardioid
3
2
1
5
6
7
4
8
8
SGC-598 Condenser Microphones
Welcome to use Takstar condenser microphones. SGC-598 is specially
designed for camera, interviews and other applications. It matches with a
majority brand of vedio camera, SLR camera and be simply fixed on the
camera. Please read this manual detailedly before using to make sure the
correct operation and exert the optimum function.
High sensitivity condenser microphone specially designed for camera
Cardioid directivity characteristic can effectively reduce the ambient noise
Op10dB sensitivity tone up and 200Hz bass filter meet the demand
of different applications
Standard connector size for easy connection with camera
Shock proof design can reduce the mechanical noise of cameras and other
vibration noise
Rugged alu mic housing features effective EMI resistance
Powered by 1.5V AA alkaline battery, playtime is up to 100hrs
Low power indicator
Features
Transducer Principle: Back Electret Condenser
Directivity Characteristic: Cardioid
Frequency Response: 50Hz-16kHz
Sensitivity: -32dB
±
3dB(0dB=1V/Pa at 1kHz)
Sensitivity Tone Up: +10dB
Bass Filter: 10dB/octave at 60Hz
Output Impedance: 2000
Ω±
30%
Power Requirement: 1.5V AA battery
Specification
Function Illustration
Frequency Response Graph
Power switch: Push to “ON” for turning on the microphones and
conversely for turning off
Sensitivity tone up switch: Tone up the volume of microphone
Bass filter switch: Turn it on can reduce the ambient noise
Power indicator: Turn on the power switch, the indicator is green; when it
is at low power, the indicator is red
Windscreen
Battery compartment
Camera clip nut
Shock mount: Reduce the mechanical noise of cameras and other
vibration noise
1. Open the battery compartment and correctly install the battery according
to the marks of positive and negative polars.
2. Turn the camera clip nut right, then clip the microphone in the camera
socket and turn left to fix them. The shock mount is with distance
adjustable function, you can adjust microphone’s position depending on
actual situation.
3. Insert
Φ
3.5mm plug of connecting cable into mic input socket of camera,
the microphone will work when you turn it on.
4. Microphone meet the demand of different applications and provide
op10dB sensitivity tone up and 200Hz bass filter.
Operation Instruction
Related specifications and configuration are subject to change without
notice.
If you need the information of service or accessories, please contact the
local dealer.
Caution
1. The sensitivity of condenser microphone is too high to fall from high place
or given strong shock.
2. When the condenser microphone is not used, please store it in dry and
clean place. To avoid the effect of sensitivity and timbre, please don’t
store or use it in the place with high temperature/humidity and strong
magnetic field.
3. When you stop using condenser microphone, please turn the power
switch off to save battery power.
4. When long time no use, please take out the battery to avoid battery liquid
leakage which will cause circuit damage.
Standard Configuration
Windscreen: 1pc
Microphone components: 1set
Battery: 1pc
User manual: 1pc
Cloth bag: 1pc
*
*
Guangdong Takstar Electronic Co.,Ltd.
Address: No
.
2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644 Fax: +86 752 6383952 Email: [email protected] Website: www.takstar.com
