Takstar PC-K220, User Manual

Page: 14 / 20

② Connection for audio device without built-in 48V phantom power:
5. Fix the connection cable onto the mic stand or boom arm, and leave a
section/loop of cable at the mic. This helps to effectively isolate the
vibration.
6. Please turn the volume to the minimum on the audio device before
switching on the phantom power. Then gradually increase the volume to
an appropriate level. This helps to prevent speaker damage by high sound
pressure. Keep a proper distance between mic and speakers, and try not to
point the mic towards the speakers to avoid feedback howling.
7. The mic output uses a three-pin XLR male connector, as shown below:
Pin 1 (ground) Pin 2 (+)
Pin 3 (-)
Female XLR to 3.5mm Audio Cable
48V Phantom Power
Audio Interface
Male/Female XLR Cable
Professional Recording Microphone
PC
-
K220
13