Takstar MX1 Set, Manual

Page: 29 / 36

28
Trouble Shooting
A. LED does not light up after the sound card is turned on
B. No sound when playing music
C. The microphone sound can not be monitored
D.The recorded sound has no effect
1. Check if the sound card has sufficient power. Try to recharge it and then use it.
1. Check if the sound card has been connected correctly with cell phone or PC.
2. Check if the headphone has connected correctly.
3. Check if the cell phone has played sound normally, or exit the software, turn on it to
play again and check the result.
4. Check if the sound card volume has been decreased too much, try to increase the cell
phone volume and check the result.
5. Check if the cell phone volume has been decreased too much, try to increase the cell
phone volume and check the result.
1. Check if the microphone or headphone has been connected successfully.
2. Check if the microphone is condenser and 48V switch is turned on.
3. Check if the microphone volume or monitor volume has been decreased too much.
Try to increase the volume and check the result.
4. When 48V switch is set to ON, the sound card will automatically shield the headphone
microphone sound to avoid that you hear the sounds of headphone microphone and
the condenser microphone.
5. Please check if the monitoring function is turn off. Make sure to set the monitoring
function is turned on.
1. Check if wet listening & dry recording mode has been set to dry recording. If yes, the
recorded sound has no effect.
2. If the cell phone or PC has been connected with the sound card correctly. Reconnect
and try again .
3 . If the recording cell phone has been connected with the accompaniment input
connector. It will cause no effect of the recorded sound. Reconnect the recording
cell phone with the cell phone connector of the sound card and try again.
LIVE BROADCAST SOUND CARD SET
Set