Takstar HA 101, Manual

Page: 11 / 14

Charging Instruction
1 ．It can connect with power bank, PC USB or power adapter for charging.
Note: power adapter specification: DC 5V/1A; 5V/1.5A; 5V/2A；
2．If the headset amplifier is turned on, the power LED does not light up. This means
the headset amplifier has no power. If the power LED keeps lighting up red, this
means the headset has low power. Please recharge in time.
3．During charging, if LED flashes red, this means it is being charged. After being
charged fully, LED keeps lighting up green. If 5V 1.5A power supply is used, it takes
about 4 hours to charge fully. After charging fully, stop it to avoid over-charging.
Note: for the first time operation, it is recommended to charge fully first. If the
headset amplifier will not be used for a long time, please charge it once every
half year to avoid over-discharging and battery damage.
1 ．Connect the headset with the headset connector of amplifier
2．Use the audio cable to connect the output connector of player equipment, e.g.
music player, cell phone, MP3, etc, with the audio input connector of headset amplifier.
3. Turn on the headset amplifier, and adjust the volume to a proper level.
Operation
Headset Audio cable
Player
HA 101
PORTABLE HEADSET AMPLIFIER
10