GN-900 is an embedded gooseneck microphone specially
designed for conference, public address, speech, etc.
To get the best pickup angle of the microphone, just adjust
the angle of the gooseneck. The microphone features high
sensitivity, low noise and clear sound transmission. The bottom
of the microphone is locked on the table top which effectively
prevent the interference sound of moving and collision. Easy
for installation, reliable and convenient for use.
Transducer Principle Back electret condenser
Directivity Characteristic
:
: uni-directional
Frequency response: 30Hz-20KHz
100 Ω ± 30% (at 1KHz)
9-48V phantom power
: 22mm-24mm
:
Sensitivity: -30 ± 3dB (0dB=1V/Pa at 1KHz)
Output impedance:
:
Power Requirement
Diameter of Mounting Hole
Connection Mode XLR connector
Specification
Product Structure Diagram
lock
nut
Power Indicator
power
switch
XLR
Installation Method: Use a borer to drill a diameter of 22mm
to 24mm round hole on the installation table top, insert the
microphone and then fix it with the lock nut.
1.
2.
3.
4.
Please use the supplied microphone windscreen to protect
the headcase/capsule, this will effectively reduce the wind
noise and acoustic feedback. Keep the windscreen away
from the dust, it may change the microphone frequency
response characteristic. Clean the windscreen regularly and
install after it is completely dried.
Cover the headcase of the microphone or put the microphone
close to the speaker may generate howling, in this case, turn
down the volume of the microphone first and keep distance
from the speaker. Do not put the microphone align with the
speaker.
Microphone features high sensitivity, avoid being dropped
from a high place or with strong shock.
Microphone should be stored in a clean and dry place when
it is not used, do not use and keep the unit in the high
temperature, humid environment to avoid impact on the
timbre and the sensitivity.
Caution
:
Conference Microphone
※
The product specification and configuration is subject to
change without prior notice.
www.takstar.com.
※
If you need service or accessory information, please contact
local TAKSTAR dealer or visit our website:
GN-900
Guangdong Takstar Electronic Co., Ltd.
Address: No
.
2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644 Fax: +86 752 6383952 Website:
E-mail: [email protected]
www.takstar.com
