Takstar EKX-4A, User Manual

Page: 50 / 58

48
7
.
SUB WOOF OUTPUT PROCESS
PEQ curve adjust area, adjust the frequency and gain parameter by dragging the frequency(small
round). Drag the small square can change low cut frequency. Click ”show all EQ parameter”, show
all the PEQ frequency, gain, bandwidth parameter, click” EQ reset”, all the PEQ parameter can
resume to the factory default value.
PEQ parameter display area, you can input the data manually to change corresponding
frequency, Q value, gain, filter style( low shelf, high shelf, low cut, high cut) and bypass function
key.
PEQ adjust push rod, change the current chosen PEQ parameter( frequency, bandwidth, gain).
Adjust sub woof low cut frequency ,the scale is 20Hz-500Hz,low cut filter style have Butterworth-
6dB--24dB/Bessel-6dB--24dB/link-12dB--24dB,and bypass function key.
Adjust sub woof high cut frequency ,the scale is 20Hz-500Hz ,high cut filter style have Butterworth
-6dB---24dB/Bessel-6dB--24dB/link-12dB--24dB.
Sud woof delay can adjust separately.
AGC(auto gain control) function .sub woof output volume will slow down when there is Mic Input,
attenuation can adjust continuous, the value is 0dB- -30
d
B.
Sub woof output music, mic, echo, reverb volume adjust.
Adjust compressor threshold and level display. When the light turn yellow, it means the
compressor started. click ”setup” to enter compressor parameter setting window, threshold, start
released time ,ratio adjustable and compressor curve display. Subwoof phase can choose 0 and
180, and mute function.
Set output channel working mode, singing and dance music mode can be chosen in manual
status, in automati status, mic on enter singing mode, mic off enter dance music mode.
1
2
3
4
5
6
7
8
9
10
1
2
3
4 5 6 7 8 9
10
EKX-4A
DIGITAL KARAOKE EFFECTOR