Welcome to use EKS-101, the built-in 2 way full range speaker
which adopts plane wave guide technology for overlapping
phase delay transmission and the converted sound wave phase,
high sensitivity,
c
lear and charming tone, wide and natural
range to suit for multifunction hall, conference hall, bar, KTV.
Please read the user manual for
better operation and keep it
for reference in future.
Speaker Cabinet Series User Manual
EKS-101
Features
EKS-101 consists of one 10 inch cone woofer and one 36 mm
tweeter. The tweeter uses PEEK diaphragm and CCA voice coil.
The woofer uses refractory glass fiber bobbin and 50mm CCA
winding voice coil for high efficiency and reliable performance,
and symmetric magnet to reduce second harmonic distortion.
The crossover components use extremely low consumption
OFC inductor and high quality polyethylene capacitor to
reduce the sound quality loss.
Refractory Peek diaphragm is durable and anti-erosive and
keeps excellent mechanical performance in 250°C during long
time operation.
15mm MDF trapezoidal enclosure eliminates standing wave
inside, black painting finish for anti-moisture, handle for easy
transportation, Al socket for pole mounting, multiple flying
points for flexible applications.
Specification
Rated power: 500W(AES)
Impedance: 8Ω
Frequency response: 60Hz-19kHz (±3dB)
Sensitivity: 95dB
Coverage: H100°×V 55°
Max SPL: 120dB
Crossover mode: 2 way passive
Crossover frequency: 2300Hz
Suspension/installation: multiple flying points/pole
mounting(adjustable angle)
Connection: 1×NL4 speaker connector, connect 1+, 1- for
operation
Cabinet: 15mm MDF
Finish: black painting
HF: 1.4"×1 (36mm, 26mm throat) 90 magnet
LF: 10"×1 (50mm), 145 magnet
Dimension (mm): 320×320×520 (W×D×H)
Application
Multi-function hall, conference hall, bar or KTV
Product
Content
EKS
-
101
speaker
cabinet
User
manual
Caution
1. Used
with
TAKSTAR EKA
-
3A
power
amplifier
together.
2. Ensure
to match the power
and
impedance
of
power
amplifier
and speaker
cabinet. The
unbalanced
configuration leads to equipment damage or bad sound
effect.
3. Do
not
put
objects
on
the
cabinet
due
to
the
severe
vibration amplitude
of
the
speaker
cabinet.
4. Ask
professional
technician
for
reliable
installation in a
place hard to touch.
5. Handle
with
care
during
transportation to avoid speaker
cabinet Damage.
Note: the above data is obtained from the test of Takstar
laboratory, and has the final interpretation right!
Safety instruction
In order to avoid possible personal injury or property
damage caused by electric shock, high temperature, fire,
radiation, explosion, mechanical hazards and improper use,
please read and observe the following items carefully before
using the product.
1. When using the product, please confirm whether the power
of the connected device matches the power of the product,
and adjust the volume of the device. Do not use it for a long
time when the power of the product is exceeded or at a high
volume to avoid product failure and hearing damage.
2. If there is any abnormality (such as smoke, odor, etc.)
during use, please turn off the power switch and unplug the
power plug immediately, and then send the product to the
dealer for maintenance.
3. The product and accessories should be placed indoors in a
dry and ventilated place. Do not store them in a humid and
dusty environment for a long time. Avoid getting close to
fire, rain, water, excessive collision, throwing, vibrating the
machine and covering the ventilation holes during use, so
as not to damage its function.
4. If the product needs to be fixed on the wall or ceiling, please
make sure to fix it in place to prevent it from falling down.
5. When using the product, you must abide by the relevant
safety regulations. Please do not use the product in the
occasions that are clearly prohibited by laws and
regulations to avoid accidents.
6. Please do not disassemble, refit or repair the product by
yourself to prevent personal injury. If you have any
questions or service needs, please contact the local dealer
for follow-up.