Features
Caution
Application
Medium or small banquet hall, multifunction hall, large conference room
1. To ensure installation safety, the speaker cabinet quantity can not be more than 10 on one side.
2. Make sure the power and impedance of speaker cabinet match with that of the power amplifier, otherwise it leads to
equipment damaged or bad sound.
3. Ask professional technician for installation.
4. During operation, keep the horn toward the audience for better effect.
5. Handle with care during transportation.
6. After operation, fix the connection bar and pin on the cabinet to prevent from losing them.
Product Content
ECA-081SUB speaker cabinet ×1
User manual×1
Dear Customer,
Thank you for purchasing ECA-081SUB line array subwoofer which is used with ECA-032 full range speaker cabinet
together. ECA-081SUB features compact contour, easy installation and adjustment, clean and powerful bass for bass
compensation applications.
Please read the user manual carefully before operation and keep it for reference in future.
ECA-081SUB Line Array Subwoofer
Specification
Rated Power: 100W
Rated Impedance: 8Ω
Frequency Response(±3dB): 60Hz-1KHz
Sensitivity(1W/1M): 92dB
Max SPL: 112dB
Crossover Frequency: 125Hz
Filter: HP Bwt24，LP Bwt24
Suspension/Installation: flying suspension
Wiring: 2×NL4speakon（IN1+, 1-，LINK1+, 1-）
Enclosure: 15mm plywood
Finish: white painting
Subwoofer: 8″×1（35mm），110 magnet
Dimension(mm): 302×353×259mm（W×D×H）
Net Weight: 7.5Kg
The line array subwoofer is designed with 8 inch 35mm cone woofer. The speaker features durable cloth surround for
powerful bass, and symmetric magnet for low harmonic distortion, and long stroke voice coil for high electro-acoustic
energy conversion efficiency
Vented enclosure and accurate acoustic simulation design ensure high bass efficiency. The compact enclosures are
connected via Al pieces. The speaker cabinet quantity can be adjusted according to the actual installation requirement
Installation
Figure 1
Figure 2
M8 ring bolt
Disassemble the
suspension part
ECA-081SUB
ECA-081SUB
ECA-032
pin connection
hole
C-C vertical angle 5°
C-B vertical angle 0°
ECA-081SUB
5°
0°
B C
C
1.Suspension holes are designed on the cabinet top.
Disassemble the screws and assemble M8 ring bolt
for installation (refer to figure 1).
2. When two subwoofers are used, disassemble the
suspension part on the upper cabinet bottom, and
assemble screws to prevent from leakage (refer to
figure 1). The subwoofer ECA-081SUB is connected
with full range speaker cabinet ECA-032 on three points.
Use the bolt to adjust vertical angle in two steps (refer
to figure 2).
3.Two subwoofers can be assembled as a group in
parallel way, 4Ω impedance. It is recommended to use
one channel of power amplifier EKA-3A/3D/403/403D
for one group of speaker cabinets, and to use with
EKX-306 audio processor together.
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952 Email: [email protected] Website: www.takstar.com