9
4
INSTALLATION METHOD
㸩
㸫
㸩
㸫
1
2
1
2
3
ձ
Mount a wireless transmitter to a
wireless transmitter space. Arrange
wiring and configure settings according
to the wireless transmitter instruction
manual.
ղ
Connect the connection cable of the
sensor unit to the base unit.
ձ
Break appropriate knockouts for the
mounting holes of the base unit using
a screwdriver.
ղ
Attach the sensor and base units to the
housing base using tapping screws.
ձ
Mount batteries in the battery space on the
base. (Refer to the “3 (7) MOUNTING
BATTERIES” section)
ղ
Attach the battery cover.
Connection cable
3.94
”
(100mm)
MAX
Battery cover
Wireless transmitter
housing
Sensor unit
Base
Knockout
TA attachment
ձ
Attach screws and nuts to the base unit.
Then slide the base unit from the top, and
fix it using the screws.
ղ
Slide the sensor unit from the top, and fix it
using the screws.
ճ
Connect the sensor unit connection cable
to the base unit.
Tapping screw
φ3×12mm recommended
(sold separately)
Sensor unit
Base
ATTACHING TO THE TA TOWER
3.94
”
(100mm)
MAX
Fixing screw
position
Fixing screw
position
ձ
Break knockout on the sensor unit.
ղ
Fix the TA attachment using tapping
screws from the rear side of the sensor
unit. (3 positions)
ճ
Break knockout on the base unit.
（
4
Points of the marking of TOWER
）
