1
This unit is a battery operated photoelectric beam sensor consisting of a
transmitter and a receiver.
The direct path between the transmitter and the receiver forms the
detection line. When this detection line is interrupted (light is obstructed for
0.05 to 0.5sec. or more), the receiver outputs a signal. The signal is sent
through the wireless transmitter to the wireless receiver. No external wiring
cable is required.
The battery operated design allows this unit to operate without an external
power supply over a long period of time. The battery power also can be
shared with a wireless transmitter.
In order to ensure that the detection line has sufficient margin of sensitivity,
adjust the direction of the light beams before putting the system into
operation. Providing sufficient margin of sensitivity reduces the malfunction
caused by dense fog, heavy rain, frost, snow, and other such weather
conditions.
Thank you for purchasing this product. Before using the product, please read this instruction manual to ensure correct operation.
This product is designed to be installed into the housing (sold separately) for use. Make sure to install this product into the housing
for use.
Main Features
(10) WIRELESS ALIGNMENT CHECKER
Enables easy and accurate beam alignment. (Sold
separately)
(11) LIGHTNING PROTECTION
This unit is insusceptible to induced lightning
because of its battery operated system.
(8) TARGET COLOR
The vivid color of the internal structure can be
recognized easily at distance during the beam
alignment procedure.
The color differs between transmitter and receiver
for easy installation and checking.
(7) DUAL RING SIGHT
Enables clear view for easy beam alignment.
(9) INCREASED ANGLE ADJUSTMENT
±20° vertical adjustment to adapt to changes in
elevation for maximum flexibility
<Reference> This unit can be installed in a place
with a height difference of 59
’
(18m) or less when
the protection distance is 165
’
(50m), and 118
’
(36m)
or less when it is 330
’
(100m).
(2) QUAD HIGH POWER BEAM
The beam power is 100 times greater than the
minimum requirement.
The beam distance is 10 times longer than the
described specification.
This high power beam ensures high reliability against
harsh conditions such as fog, snow and heavy rain.
(1) WIDE BEAM
As is the case with the wired system, increasing the
vertical beam pitch together with the 4 beam
simultaneous interruption system significantly reduces
false alarms from birds or fallen leaves, etc.
By combining a wireless transmitter, external wiring
becomes unnecessary, which can substantially reduce
wiring material costs and related work.
In addition, this unit realizes longer battery life due to
its low current consumption.
(3) REDUCE COSTS
(6) ECOLOGY
RoHS compliant – Environment friendly. Free from
Lead, Mercury, Cadmium, Hexavalent chromium,
Polybrominated biphenyl, Polybrominated diphenyl
ether.
BATTERY OPERATED PHOTOELECTRIC BEAM SENSOR
Instruction Manual
TXF-125E-KH : OUTDOOR 330ft (100m)
(4) DETECTION DISTANCE SELECTABLE
4 detection distances are selectable within a single
unit [330
’
(100m) / 247
’
(75m) / 165
’
(50m) / 82
’
(25m)]
(5) BATTERY SHARING FUNCTION
This function integrated in the sensor enables battery
sharing with a wireless transmitter. Low battery
output voltage is adjustable by volume switch.
Transmitter
Receiver
Detection line
Coverage of light beams
