background image

35(&$87,216

 Ultraviolet rays are invisible. They may be released from 

unexpected objects. Set the sensitivity to "L" and the detection 
timer to the next longer time when the sensor does not operate 
properly, such as generating an alarm when there is no flame 
or when none of the "possible causes of false alarm" listed 
below are present.

 In the case of an explosion, the sensor may be damaged before 

detecting flames.

PRODUCT CLASSIFICATION

 Do not install the unit near 

railways. Sparks from 
pantographs may cause false 
detection.

 Do not install the unit near 

high voltage power lines. 
Sparks from pylons may 
cause false detection.

 Keep the detection window 

straight and the adjusting 
part at the bottom.

 Do not pour water directly on the sensor. (It is rain proof, but 

not water tight.)

 Do not install the unit in locations where high amounts of 

steam stagnate (bathrooms etc.).

 Do not install the unit in areas where the temperature is under 

-20°C (-4°F) or over +50°C (+122°F).

 Do not install the unit in an environment subject to electrical 

noise or intense vibration.

 After adjusting the angle, tighten the screws and bolts to 

prevent the unit from falling and to maintain resistance to 
rain.

 A high installation location is recommended to prevent 

vandalism. (over 2.5m)

 This product is for installation on walls, ceilings, and under 

eaves. Use the optional attachment for installation at uneven 
places.

 If a person who is undergoing  isotope therapy (radioiodine 

therapy) comes near the unit, they may emit radiation 
sufficient to trigger the sensor. Set the sensitivity to "L" in 
cases where such persons may be near the sensor.

 Do not install the unit in locations where sparks or flames are 

usually used (kitchen, incinerator, etc.).

 Do not install the unit in locations subject to severe shock or 

electric noise.

 Do not install the unit in locations where a shield object (glass, 

transparent resin, etc.) is in front of the sensor.

 The unit is designed for ceiling and wall mounting.

Please make sure the base surface is protected with 
reinforcements. In case of installation on concrete or gypsum 
board, please use anchors and screws suitable for the material.

 Keep the sensor angle somewhere between completely 

horizontal and completely vertical when installed outdoors.

 The detection window is made of specialized glass and is 

fragile.

 Do not touch the detection window barehanded. Oil from hands 

may cause low sensitivity. Wipe the detection window with a 
soft cloth with alcohol if it is dirty. After installation, wipe 
again when necessary.

 The sensitivity will decrease in cases of rain or snow in the 

detection area.

 In cases where the detection window is covered with frost, ice, 

etc., the sensitivity will become very low and the sensor may 
not detect properly.

 This sensor detects ultraviolet rays at a very sensitive level, so 

it will possibly detect objects other than flames. In addition, 
this sensor does not detect burning objects that are not 
producing flames.

OBJECTS TO BE DETECTED

OTHERS

(The factory setting is 6 sec.)

* 

There are many other ultraviolet rays in outdoors that may 

cause unexpected detection. Therefore, it is recommended that 
the detection timer be set to longer than 6 sec. when the unit is 
installed outdoors.

INSTALLATION

This sensor is designed to detect ultraviolet rays contained in 
flames and to issue a signal. This unit is not a fire-preventing 
device. It will not detect smoke or heat. TAKEX is not 
responsible for damage, injury or losses caused by fire, accident, 
calamity, natural disasters (including inductive surge by 
lightning), abuse, misuse, abnormal usage, faulty installation or 
improper maintenance.

 Sparks from areas nearby where welding is being performed 

may cause false detection.

+DORJHQODPS

(OHFWULFGLVFKDUJHODPSVXFKDV
DPHUFXU\ODPS

(OHFWULFVWHULOL]HUODPS

:HOGLQJVSDUNV

(OHFWULFVSDUNVFDXVHGE\
PRWRUSDQWRJUDSK

6XQOLJKW

(OHFWULFGLVFKDUJHIURPOLJKWQLQJ

5DGLDWLRQ

+LJKHOHFWULFDOILHOG

3RVVLEOHFDXVHRIIDOVHDODUP'R
QRWLQVWDOOWKHVHQVRUQHDUWKH
IROORZLQJ

)ODPHVZKLFKFDQQRWEH
GHWHFWHG

)ODPHVWKURXJKJODVVRU
WUDQVSDUHQWUHVLQ

/LWSRUWLRQRIFLJDUHWWH

%XUQLQJFKDUFRDORU
EULTXHW

(OHFWULFVWRYH

%XUQLQJREMHFWZLWKRXW
IODPHV

,167$//('
287'2256

'(7(&7,21
7,0(5

6(16,7,9,7<

VHF1RWUHFRPPHQGHG
VHFRUPRUH2.

+1RWUHFRPPHQGHG
/2.

10°

10°

Possible angles

NG

NG

NG

OK

OK

OK

NG

NG

NG

NG

Summary of Contents for TX-124R









Reviews: