[Transmitter]
[Receiver]
NAMES OF OPERATION SECTION
1-3
Reception authorization
LED switch
Transmitter LED
switch
“9 EXPLANATION OF FUNCTIONS
(9-3 LED LIGHT TURN-OFF FUNCTION)”
“9 EXPLANATION OF FUNCTIONS
(9-3 LED LIGHT TURN-OFF FUNCTION)”
“5 INITIAL SETTING (5-4 BEAM POWER SELECTION )”
“5 INITIAL SETTING (5-1 MODULATION FREQUENCY CHANGEOVER)”
“5 INITIAL SETTING (5-1 MODULATION FREQUENCY CHANGEOVER)”
“9 EXPLANATION OF FUNCTIONS (9-1 AUTO GAIN LOCK FUNCTION)”
“5 INITIAL SETTING (5-8 SOUND CHECK)”
“5 INITIAL SETTING (5-7 RESPONSE TIME)”
“5 INITIAL SETTING (5-6 ENVIRONMENTAL OUTPUT SWITCH)”
“5 INITIAL SETTING (5-5 ALARM OUTPUT SWITCH)”
“5 INITIAL SETTING (5-3 MASTER/ SLAVE SELECTION)”
“5 INITIAL SETTING (5-2 SYNCHRONIZED TIMING)”
“5 INITIAL SETTING (5-2 SYNCHRONIZED TIMING)”
“9 EXPLANATION OF FUNCTIONS
(9-2 UPPER/LOWER CHANGEOVER FUNCTION)”
“9 EXPLANATION OF FUNCTIONS
(9-2 UPPER/LOWER CHANGEOVER FUNCTION)”
(Factory set : ON)
(Factory set : ON)
Transmission LED
(Upper/lower)
Light reception authorization LED
(Upper/lower)
: Red
Beam power switch (Factory set : H)
Transmitter channel changeover swicth (Factory set : 1CH)
Alarm LED : Red
Sensitivity attenuation LED : Red
Sound check switch (Factory set : OFF)
Auto-gain lock switch
(Factory set : OFF)
Monitor Jack
Receiver channel changeover switch (Factory set : 1CH)
Upper/Lower changeover switch
Upper/lower changeover switch
Synchronized timing switch (Factory set : A)
Synchronized timing switch (Factory set : A)
Environmental output switch (Factory set : N.C.)
Alarm output switch (Factory set : N.C.)
Detection response time adjustment switch (Factory set : 0.1sec)
Master/Slave selection switch
(Factory set :
Master)
Vacant
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
6,7,8.
5.
4.
3.
1,2.
8.
6,7.
5.
4.
3.
1,2.
Please set "ON" after complete optical axis adjustment.
3
