Horizontal direction adjustment
8QODWFKWKHDOLJQPHQW
OHYHUDQGUHWXUQ
WRLWVRULJLQDOSRVLWLRQ
)RU/('RII
)RU/('RQ
Turn the mirror unit to the direction
\RXZDQWWRSURWHFWWRDGMXVWWKH
GHWHFWLRQDUHD
DGMXVWDEOH>LQVWHSV@
5HIHUWRWKHDUHDVHWWLQJWDEOHLQVLGHWKHVHQVRU
XQLWDQGVHWWKHGHWHFWLRQDUHDFRUUHVSRQGLQJWR
WKHLQVWDOODWLRQVLWHXVLQJWKHDUHDVHOHFWRUDQG
LQGLFDWRU7KHQWLJKWHQWKHORFNLQJVFUHZ:KHQ
PRYLQJWKHDUHDVHOHFWRUXSDQGGRZQWKH
LQGLFDWRUZLOOVKRZWKHOHWWHUVIURP$WR)6HOHFW
WKHSRVLWLRQEDVHGRQWKHLQVWDOODWLRQKHLJKWDQG
PD[LPXPGHWHFWLRQGLVWDQFH
>([DPSOH@,QVWDOODWLRQKHLJKW
’
P
7RVHWWKHPD[LPXPGLVWDQFHWR
’
(15m):
&KRRVHDUHDVHOHFWRU>%@
Detection distance adjustment
Indicator
$UHDVHOHFWRU
/RFNLQJVFUHZ
Detection distance [rough adjustment]
7RHQDEOHILQHDGMXVWPHQWPRGHVOLGHWKHWZRDOLJQPHQWOHYHUVWRWKHULJKWDQGODWFK
LQWRSODFHWKLVZLOODFWLYDWHWKHDOLJQPHQW/('V/RRNDWWKHVHQVRUWRFKHFNWKH
VHQVLWLYH]RQHVWKHPLUURUVXUIDFHVZLOODSSHDUUHGRUJUHHQZKHQVWDQGLQJLQVLGHWKH
GHWHFWLRQDUHD8VHWKHKRUL]RQWDOGLUHFWLRQDGMXVWPHQWWRILQHWXQHDVUHTXLUHG
6WDQGDWWKHPD[LPXPGLVWDQFHRI\RXUGHVLUHGFRYHUDJHDQGDGMXVWWKHDUHDVHOHFWRU
VRWKDWWKHUHGPLUURUVXUIDFHLVYLVLEOHEHWZHHQVKRXOGHUDQGFKHVWKHLJKWDQGWKH
JUHHQPLUURUVXUIDFHLVYLVLEOHEHWZHHQZDLVWDQGNQHHKHLJKW
1RWHWKHPLUURUVXUIDFHVZLOODSSHDUXQOLWZKHQVWDQGLQJ
RXWVLGHRIWKHGHWHFWLRQDUHD
Detection distance [fine adjustment] using LED area checker
$OLJQPHQWOHYHU
6OLGHWKHDOLJQPHQW
OHYHUWRWKHULJKWDQGODWFKLW
Red
Green
Red
Green
Red
Green
7KHGHWHFWLRQDUHDDQGGHWHFWLRQRSHUDWLRQFDQEHRSWLPDOO\VHWDVIROORZV
2SHUDWLQJWKHDUHDVHOHFWRUHQDEOHVWRDGMXVWWKHGLVWDQFHRIWKHGHWHFWLRQDUHD
7XUQLQJWKHPLUURUXQLWHQDEOHVWKHXVHUWRDGMXVWWKHGHWHFWLRQDUHDLQDKRUL]RQWDOGLUHFWLRQ
* Always set the detection distance to
15m in pet mode. When adjusting the
detection distance, use the supplied
area masking sheet and mask the
detection area instead of adjusting
with the area selector.
(Refer to “4 DETECTION AREA”)
>([DPSOH@,QVWDOODWLRQKHLJKW
’
P
7RVHWWKHPD[LPXPGLVWDQFHWR
’
(15m):
&KRRVHDUHDVHOHFWRU>$@
>([DPSOH@,QVWDOODWLRQKHLJKW
’
P
7RVHWWKHPD[LPXPGLVWDQFHWR
’
P
&KRRVHDUHDVHOHFWRU>&'@
>([DPSOH@,QVWDOODWLRQKHLJKW
’
(5m)
7RVHWWKHPD[LPXPGLVWDQFHWR
’
P
&KRRVHDUHDVHOHFWRU>)@
* Do not set the detection distance to
less than 25
’
(7.5m) in the area
selector. To set a distance of less than
25
’
(7.5m), attach the masking sheet
and adjust the area.
(Refer to “4 DETECTION AREA”)
When the zone faces toward a place where false operation can
occur (refer to "3 PRECAUTIONS), adjust or mask the area to
avoid.
■
Detection area adjustment method
8
ADJUSTMENT OF DETECTION AREA
When the adjustment has
been completed unlatch both
alignment levers and ensure
they return to the left edge of
each mirror unit. If the levers
are not returned to the
original position the unit will
issue a continuous alarm
output and the alarm LED will
illuminate.
