●
PA-15WE (Wide angle)
●
PA-30NE (Long range)
15m
1.5m 15m
10m
5m
15m
10m
10m
15m
25m
5m
0
0
20m
30m
5m
(VARIABLE RANGE)
Height 2.5m
Height 2.5m
3m
3
°
6.8
°
40
°
90
°
(VARIABLE RANGE)
90
°
10m
15m
25m
5m
20m
30m
Symptom
Passibe Cause
●
No power supply,
broken wire or
incorrect voltage.
●
Window shielded by an
opaque substance.
●
Sensitivity adjustment
too low.
Completely
inactive
(Operation
LED doesn't
lights.)
Frequent
alarm
(Operation
LED lights
too often.)
Control panel
fails to work
although
LED lights.
●
Incorrect power supply.
●
Something moving in
protected area or rapid
temperature variations.
●
Large electrical noise
source such as power
machine nearby or
wiring too close to that
of the PIR.
●
Poor contact, broken
wire or defective
insulation of signal line.
●
Damaged alarm contact.
●
Correct power supply or
replace the broken wire.
●
Remove the shielding
substance.
●
Turn sensitivity up and
re-check operation.
●
Correct power supply.
●
Remove the cause.
●
Turn the sensitivity
down.
●
Relocate the device.
●
Change the path of
wiring.
●
Check wiring with a
tester.
●
Check alarm contact
operation with a tester.
Remedy
TROUBLESHOOTING
5
7
6
ADJUSTMENT
8
EXTERNAL DIMENSIONS
9
COVERAGE
SPECIFICATIONS
Note :
TAKEX, passive infrared sensor is designed to detect infrared energy
variation caused by the presence of a human body.
Therefore note that similar variation in conditions in the protected area, due
to other reasons, may cause the sensor to create an alarm as it is unable to
distinguish between the sources.
When the sensor is used outdoors, moving objects with heat source (wind,
fallen leaves, small animals) may cause the sensor to create an alarm.
AVOID USING THE SENSOR FOR FULL-SCALE SECURITY PURPOSE.
Analyze possible problems according to the following table.
If normal operation can not be restored by these procedures,
contact either the dealer from whom you bought the unit or
TAKEX.
Check operation after installation is completed.
It is usually unnecessary to adjust sensitivity which has
been set at the factory. Adjust sensitivity to low if small
animals activate the sensor.
Allow approx. 1 minute to warm up after power is
supplied.
After 1 minute, operate a walk test in the protected
area to check if the alarm is activated.
(Operation LED (red) lights when an alarm is
initiated.)
Passive infrared sensor
Model
Detection system
Sensitive zone
Coverage
Output signal
Operation LED
Supply voltage
Current consumption
Ambient temperature range
Mounting position
Connection
Weight
Appearance
PA-15WE
PA-30NE
Passive infrared
24 (12 pairs)
2 (1 pair)
Wide angle
(Max. 50
°
(15m))
Dry contact relay 1C
Reset : approx. 2 sec.
Contact capacity : 30V, 0.5A (resistant load)
Red LED (Lights when sensor detects)
10.5V DC to 30V DC (non polarity)
25mA or less
-2
°
F to 122
°
F (-20
°C
to +50
°C
)
Indoor / Outdoor (Rain-proof)
Lead wire
17.5oz (500g)
Sensor : resin (white)
Mounting portion : resin (dark gray)
Long range
(Max. 100
°
(30m))
(1) Operation Check
(2) Sensitivity adjustment (sensitivity volume)
1.
2.
Limited Warranty :
TAKEX products are warranted to be free from defects in material and
workmanship for 12 months from original date of shipment. Our warranty does not
cover damage or failure caused by Acts of God (including inductive surge by
lightning), abuse, misuse, abnormal usage, faulty installation, improper
maintenance or any repairs other than those provided by TAKEX. All implied
warranties with respect to TAKEX, including implied warranties for
merchantability and implied warranties for fitness, are limited in duration to 12
months from original date of shipment. During the Warranty Period, TAKEX will
repair or replace, at its sole option, free of charge, any defective parts returned
prepaid. Please provide the model number of the products, original date of shipment
and nature of difficulty being experienced. There will be charges rendered for
product repairs made after our Warranty period has expired.
No.04-541 B9015
Wire lead
φ3.29
(φ83.5)
4.17
(106)
Solid
angle
Sensitivity Volume
4.06 (103)
3.35 (85)
8.31
(211)
2.63
(66.7) 3.29
(83.5)
45°
90
°
15.83 MAX
(402)
2.83
(φ72)
4.41
(φ112)
Mounting Box
Mouting Base
4-φ0.24
(φ6)
4-φ0.16
(φ4)
1.61
(41)
1.42
(36)
180
°Variable
In Japan
Takex America Inc.
Takenaka Engineering Co., Ltd.
https : // www. takex-eng. co. jp /
Takex America Inc.
https : // www. takex. com
Takex Europe Ltd.
https : // www. takex. com
In the U.S.
In the U.K.
In Australia
Aviary Court, Wade Road,
Basingstoke, Hampshire. RG24 8PE, U.K.
Tel : (+44) 01256-475555
Fax : (+44) 01256-466268
4/15 Howleys Road, Notting Hill,
VIC, 3168
Tel : +61 (03) 9544-2477
Fax : +61 (03) 9543-2342
https : // www. takex. com
83-1, Gojo-Dori, Sotokan Nishi-iru, Higashino,
Yamashina-ku, Kyoto 607-8156, Japan
Tel : 81-75-501-6651
Fax : 81-75-593-3816
151, San Zeno WAY
Sunnyvale, CA 94086, USA
Tel : 408-747-0100
Fax : 408-734-1100
