PARTS DESCRIPTION
1
PRECAUTIONS
2
②
Warning
Caution
This mark indicates details regarding handling which, if ignored, may result in death or injury.
This mark indicates points of which the user should be aware.
This mark indicates a prohibition, with the item shown in
the mark specifically prohibited.
This mark indicates details regarding handling which, if ignored, may result in delays in reporting
attributable to false or missed alarms.
Example:
Disassembly prohibited
Ensure that you do not disassemble or alter this
product, as this may lead to fire, electric shock, or
damage.
In the event of an abnormal condition such as smoke
or unusual smells or sounds being emitted,
immediately stop power supply to the device, confirm
that smoke is no longer being emitted, and request
repair from the retailer. Continuing to use the sensor
in this condition may lead to fire or electric shock.
Do not use the sensor with voltages other than as
specified (9 to 28V DC). Doing so may cause fire or
electric shock.
In the event of water entering the sensor, immediately
stop power supply to the device, and contact the retailer.
Continuing to use the sensor in this condition may lead
to fire or electric shock.
Ensure that the sensor is mounted in a strong location
such as over a reinforcing beam on the wall. When
mounting on surfaces other than wood such as
plasterboard or concrete, ensure that the sensor is
securely affixed using anchors and screws suited to the
surface material. If the sensor should fall off, this could
result in injury or damage.
Do not connect devices that exceed the capacitance as
shown on the output terminal. Doing so may cause
fire.
Do not use the sensor in bathrooms or other locations
with high humidity. Doing so may cause fire or electric
shock.
Tamper switch
PARTS
Cover
Body
Accessory
Area masking sheet (4set)
Self tapping screw
(
φ
4x35)2 pcs
Instruction Manual
Operation LED
Mode
setting
switches
Cover locking screw
Lens
Wiring hole
Holder locking screw
Adjustment index
Adjustment holder
Terminal
Sensitivity
adjustment
Back tamper rubber
1-1
1-2
1-3
OPERATIONAL PARTS TITLES AND FUNCTIONS
Sensitivity adjustment : Dial to adjust detection sensitivity
Mode setting switches : Indicator LED, contact logic, pulse count, and area selection DIP switches
Adjustment holder : Part to adjust detection distance
Warning
Description of the Display
→
[
7-2
Installation Method]
s
The following marks indicate precautions that should be adhered to in order that this
product can be used safely. These are important; therefore ensure that you read these
carefully.
Pole mounting bracket knockout
(use for pole mounting option)
→
[
7-2
Installation Method]
→
[
7-2
Installation Method]
→
→
[
3-2
Area Adjustment]
→
[
3-2
Area Adjustment]
→
[
3-2
Area Adjustment]
[
4
FUNCTION]
→
[
4
FUNCTION]
→
[
5
SETTING]
→
[
5
SETTING]
→
[
3
DETECTION AREA]
→
[
7-2
INSTALLATION METHOD]
→
[
3-3
AREA MASKING]
→
[
6
WIRING]
→
[
6
WIRING]
Wall mounting knockout
Wall mounting knockout
→
[
7-2
Installation Method]
→
[
7
INSTALLATION]
→
[
4
FUNCTION]
→
[
5
SETTING]
→
[
5
SETTING]
Pole mounting bracket
knockout
(use for pole mounting option)
s4HISEXPLAINSTHECONTENTOFTHEPACKAGINGASWELLASPARTNAMESANDFUNCTIONSASDETAILEDINTHISDOCUMENT
Please confirm that the sensor and all parts are included in the packaging.
