Takeuchi TB216, Operator'S Manual

Page: 70 / 235

2-20
Controls
multi-data diSplay
10. LCD (liquid crystal display)
It displays various data on hour meter,
trip meter and the machine.
Home screen
1. Key function display
The key function display changes
depending on the screens (Home,
Menu and each setting)
For actual operation, use the buttons,
“A”, “B” and “C”, located beneath
each symbol. Refer to “Operating
each key” on pages 2-20 to 2-25.
2. Hour meter/Trip meter
• Hour meter
Displays the total engine running time
in hours.
The rightmost digit indicates tenths of
hours (6 minutes).
Set the inspection and maintenance
intervals according to the time
displayed on the hour meter.
• Trip meter
Three patterns of desired operating
hours can be displayed.
Refer to “Trip meter display” on page
2-21.
3. Time display
Displays the time set.
Refer to “Time setting” on page 2-24.
inStrument cluSter
4. Alarm indicator lamp
The clock symbol appears when the
alarm function is turned on.
Refer to “Alarm setting” on page 2-24.
5. Auxiliary 3rd hydraulic pressure
warning lamp (If equipped)
This lamp lights up and an alarm
sounds if the fixed side (left “e”)
pressure of the auxiliary 3rd drops
abnormally while the engine is running
or if the quick-hitch is being removed
or installed.
6. Highland mode indicator lamp
(If equipped)
When the highland mode is selected
This mode is used to reduce the
engine load due to the hydraulic pump.
When the machine is operated at a
high-altitude site, the engine output is
decreased due to thin air. In such
cases, the hydraulic horse power is
automatically adjusted to prevent the
engine from stalling. The machine
automatically enters this mode if the
altitude detected by the bolometric
sensor is 800 m (2622 ft) or more.
7. Lift overload warning indicator lamp
This lamp turns on when the lift
overload warning switch is turned on.