TAKEBISHI MITSUBISHI ELECTRIC MELSEC iQ-R Series, User Manual

Page: 47 / 62

APPX
Appendix 1 Error Code List
45
A
APPENDIX
Appendix 1
Error Code List
This section shows the error code list for an option driver.
For error codes other than those shown in this section, refer to the following:

MELSEC iQ-R MES Interface Module User's Manual (Application)
*1 For more detailed causes and corrective actions, refer to the following:

Page 46 List of error codes displayed in detailed information 3
Error code
*1
Error name Error description Corrective action
1B00H Option driver error Error occurred on the option driver. Please refer to the user's manual of
the option driver.
1B01H Option driver error Error occurred on the option driver. Please refer to the user's manual of
the option driver.
1B02H Option driver settings error The settings of option drivers may be
corrupted. • Retry the writing of the settings
with MES Interface Function
Configuration Tool.
• Retry the test in the case of
executing communication test.
• Please install the latest version of
the option driver if the same error
occurs again.
1B03H Option driver not installed error The option driver which is used in the
target devices is not installed. Install the option driver to be used for
the target device.
1B04H Option driver license not registered
error The license of the option driver is not
certificated. • Register the license file of the
option driver to be used.
• Start the temporary authentication
of the option driver to be used.
1B05H Option driver unsupported version
error The option driver installed in the
module does not support some
functions. Please install the latest version of the
option driver to MES interface
module.
1B06H Option driver communication
connection error A communication error has occurred
between the module and a target
device supported by the option driver. Check whether the device set in the
"Target Device Settings" can be
connected.
3B10H Option driver error Failed to execute initial processing of
the option drivers. • Install the option driver again after
uninstalling.
• Please install the latest version of
the option driver if the same error
occurs again.
3B11H Option driver error Failed to execute initial processing of
the option drivers. • Install the option driver again after
uninstalling.
• Please install the latest version of
the option driver if the same error
occurs again.