TAKEBISHI MITSUBISHI ELECTRIC MELSEC iQ-R Series, User Manual

Page: 34 / 62

32
6 Rockwell Connection
6.3 Checking Methods for Error Descriptions
6.3
Checking Methods for Error Descriptions
This section shows the checking methods for error descriptions of Rockwell Connection.
*1 Error code
If the same error occurs repeatedly, the error is output only for the first time. (Detailed information is also output only for the first
occurrence of the error.)
When the same error occurs several times in different causes, take action to correct the error in the order of occurrence based on the
error code and detailed information that are output at the first occurrence of the error.
If clearing the error (or resetting and turning the power OFF and ON) after taking the corrective action, error information is output when
the same error occurs again.
Checking method Details
System monitor of an engineering tool Error codes
*1
can be checked by the system monitor of an engineering tool.
For details, refer to the following:

MELSEC iQ-R MES Interface Module User's Manual (Application)
MES Interface Function Configuration Tool Error codes
*1
can be checked by using the diagnostic function.
For details, refer to the following:

MELSEC iQ-R MES Interface Module User's Manual (Application)
Dot matrix LED Error codes
*1
can be checked with the dot matrix LED on the front of an MES interface module.