TAKATA Mini, Instructions Manual, Page: 50 / 176

45
Step 1 – Adjust and fasten the inner padding and straps
Before sitting your child in the TAKATA MINI, loosen
and open the straps, as described in Section 3 – Basic
instructions (Loosening the straps and opening the
buckle), and move them out of the way.
Once your child is in the seat, place the shoulder
straps over the shoulders and the lap belt over your
child
ʼ s lap, taking care not to twist or tangle the straps.
CAUTION!
[MINI_044] Check that the inner padding and shoulder
strap connection are correctly positioned. The wings
of the inner padding with the AIRPADS protect the
head, and should therefore be positioned behind your
child
ʼ s head, and above the shoulders. The shoulder
strap connections are correctly positioned if they are a
little below your child
ʼ s shoulders. If this is not the
case, move the adjustable inner padding up or down
accordingly.
Step 2 – Close the belt buckle
[MINI_026] To secure the straps on the TAKATA
MINI child car seat, bring the two magnetic belt
tongues together again.
Push the tongues
fi
rmly into the buckle, until you hear
them click into place.
WARNING!
Before every journey, always ensure that the tongues and
buckle are locked together. You can check this by pulling the
tongues up, without pressing the red button on the buckle.
Step 3 – Adjust the lap belt
WARNING!
Pull the lap belt down as far as possible, so that the lap
area of your child is protected. If the lap belt runs
across your child’s stomach, there is a risk of internal
injuries in the event of an accident.
de
it
nl
fr
es
en