TAKASAGO HX-S-G4 Series, Instruction Manual

Page: 12 / 216

Preparation and Connection
12
Preparation and Connection
Unpacking
Please check the following accessories are included when unpacking.
Please confirm there is no scratches or dents on the power supply and accessories.
No. Name
The
Number
Included
HX-S-G4 Series
Remarks
30
-200
30
-400
60
-100
60
-200
500
-12
500
-24
1000
-6
1000
-12
1
Input Connector 1
○ ○ ○ ○ ○ ○ ○ ○
2
Dummy Connector 2
○ ○ ○ ○ ○ ○ ○ ○
They are attached to the M/B
CONTROLs such as
㉔
and
㉕
on
the rear panel at the time of shipment.
3
Isolated Control Connector
1
○ ○ ○ ○ ○ ○ ○ ○
It is attached to the
㉑
ISOLATED
CONTROL on the rear panel at the
time of shipment.
4
External Control Connector
1
○ ○ ○ ○ ○ ○
× ×
It is attached to the
㉓
EXTERNAL
CONTROL on the rear panel at the
time of shipment.
5
Instruction Basic Manual 1
○ ○ ○ ○ ○ ○ ○ ○
6
Basic
Ｉ
nstruction Manual (CD-
ROM)
1
○ ○ ○ ○ ○ ○ ○ ○
7
Sequential Operation Setting
Software (CD-ROM)
1
○ ○ ○ ○ ○ ○ ○ ○
8
Output Terminal Connection Bolts
(for 30V and 60V type)
2 sets
○ ○ ○ ○
× × × ×
The following are attached to the
㉝
DC OUTPUT terminal on the rear
panel at the time of shipment.
- A M12 x 30mm bolt
- Two M12 flat-washes
- A M12 spring-washer
- A M12 nut
9
Output Terminal Connection
Screws (for 500V and 1000V type)
2
× × × ×
○ ○ ○ ○
M5 x 12mm screws are attached to the
㉝
DC OUTPUT terminal on the rear
panel at the time of shipment.
10
Output Terminal Cover
(for 30-200 and 60V type)
1 set
○
×
○ ○
× × × ×
- Two same-shape Output Terminal
Covers
- A support for mounting cover
- Two M3 x 6mm screws
11
Output Terminal Cover
(for 30-400)
1 set
×
○
× × × × × ×
- Output Terminal Cover (4-split)
- Six M3 x 6mm screws
12
Output Terminal Cover
(for 500V and 1000V type)
1 set
× × × ×
○ ○ ○ ○
- Two same-shape Output Terminal
Covers
- A support for mounting cover
- Two M3 x 6mm screws
13
Output Terminal Protection Tube
(for 30-200 and 60V type)
2
○
×
○ ○
× × × ×
14
Output Terminal Protection Tube
(for 30-400)
2
×
○
× × × × × ×
15
Wire bands for fixing Output
Terminal Protection Tube
4
○ ○ ○ ○
× × × ×
16
Parallel Connection Terminal
Cover
1 set
× ×
○ ○ ○ ○ ○ ○
It is attached to the rear panel at the
time of shipment
17
Remote Sensing Connector (30-
400)
1
×
○
× × × × × ×
It is attached to the
㉞
remote sensing
terminal at the time of shipment.
18
Remote Sensing Connector
(for 1000V type)
2
× × × × × ×
○ ○
It is attached to the
㉞
remote sensing
terminal at the time of shipment.
19
Remote Sensing Connector Cover
(for 1000V type)
1
× × × × × ×
○ ○
It is attached to the
㉞
remote sensing
terminal at the time of shipment.
20
Wire bands for fixing Remote
Sensing cable
1
× × × × × ×
○ ○
It is a wire band for fixing the cable for
remote sensing to avoid any
disconnection.
Note) "
〇
" represents the accessories are included while "×" means not-included.
Please check the all accessories in the list is included
.