TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 60 / 240

Useful Function
60
Sequential Operating Function
Overview
Sequential Operating Function of HX-S-G2 series is to control output sequentially (regularly and continuously)
by applying each settings, such as preset CV/CC value, control contents, control time, to the function.
Step 1
Number of repetition : First
OUTPUT ON
・
Preset CV/CC Value
・
Control contents
(STEP or SWEEP)
・
Control time
(0.1sec.
-9999min. 59.9Sec.)
Select
OUTPUT OFF
or Continuous
OUTPUT at the
end of
sequential
operation
Step 2
Step 3
(V
o
lta
g
e
/C
u
rr
e
n
t)
Elapsed time
STEP Control
SWEEP Control
Step 1 Step 2 Step 3
Step 1
Step 2
Step 3
Number of repetition : Second
Number of repetition : n th
Conceptual diagram of sequential operation function
■ What can be achieved by the sequential operation function
① Control output by setting preset CV/CC value, control contents (STEP or SWEEP)
and control time (0.1 sec. - 9999 min. 59.9 sec.) to each steps from step 1 to step 10. (ref. FUNC110 - 159).
②
Number of repetition is enable to set from one to 9999 or permanent repetition. (ref. FUNC101)
③ It is enable to select OUTPUT OFF or Continuous OUTPUT at the end of repetition. (ref. 102)
④
It is enable to select to resume the sequential operation function from the paused point (set 2 for FUNC100)
or to restart the sequential operation (set 1 for FUNC100), when the output is paused during the sequential operation.
Step1
Step2
（
Paused
）
Step3
Step3 Step2
(Resume)
(V
o
lta
g
e
/C
u
rr
e
n
t)
(Elapsed time)
Paused by ALM(OVP)
Resume the operation
from the paused point.
Image of resumed sequential operation
⑤
It is enable to display "Current step number", " Elapsed min. and sec.", and "Current number of repetition"
on the Number Display.