TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 205 / 240

Specifications
205
Other Functions
Specification/Models 30-200 30-400 60-100 60-200 120-50 120-100
Operational Mode Displays
All modes are displayed with LEDs
OUT ON ------------------------------------------------------------------------------------- Orange
CV (Constant Voltage) --------------------------------------------------------------------- Green
CC (Constant Current) --------------------------------------------------------------------- Green
PRESET (PRESET) ------------------------------------------------------------------------ Green
FUNC. (when setting functions) --------------------------------------------------------- Green
REMOTE (During Remote Operation) ------------------------------------------------- Green
LOCK (in Key Lock state) ----------------------------------------------------------------- Green
Master-Slave Parallel Operation
Able to control a maximum of 10 parallel connected same-voltage model products with one master unit
Master-Slave Series Operation
Able to control a maximum of 2 series connected same model products with one master unit
Startup Mode
*Only full-featured type "model name with F"
CV Priority (High Speed: 10ms) / CV Priority (Medium Speed: 100ms) /
CV Priority (Low Speed: 200ms)
CC Priority (High Speed: 10ms) / CC Priority (Medium Speed: 100ms) /
CC Priority (Low Speed: 200ms)
*CV Priority (Low Speed: 200ms) for standard version (model name without F)
Variable Slew Rate
* Only full-featured type "model name with F"
Sets the increasing and falling rate for each output voltage and output current individually.
Constant Voltage Slew Rate
Range
0.1V/s － 60.0V/s 1V/s － 120V/s 1V/s － 240V/s
Constant Current Slew Rate
Range
0.1A/s-
400.0A/s
0.1A/s-
800.0A/s
0.1A/s-
200.0A/s
0.1A/s-
400.0A/s
0.01A/s-
100.0A/s
0.01A/s-
200.0A/s
Sequential ON/OFF
*Only full-featured type "model name with F"
Output ON/OFF of multiple units can be controlled from one sequential master unit simultaneously or
with time lag (Setting range: 0.00s to 99.99s for ON/OFF respectively)
Note: Special cable is needed for use.
Memory
Saves and loads the set values of the voltage, current, and various functions in memories "A", "B", and
"C".
Key Lock Locks key operation at the front panel.
Variable Internal Resistance
( ⊿ R)
*Only full-featured type "model name with F"
0Ω-
0.15Ω
0Ω-
0.075Ω
0Ω-
0.6Ω
0Ω-
0.3Ω
0Ω-
2.4Ω
0Ω-
1.2Ω