6. Operating Instruction
-5-
6-1 Main Switch
Main switch is located on the left side of the pump cover (E X -Y M2NL )
or on the right side (E X -Y M2NR ).
OF F
T urn off the main switch after daily operation
Operate the main switch by hand only.
In the event of extremely low oil temperature,
“warm-up” mode may start.
6-2 Controls
B efore operating the chair, confirm that it is safe for the patient
and the operator.
(1) Manual Mode Control
A . Seat L ifting
K eep depressing UP button until the seat is lifted up to the
desired position.
B . Seat L owering
K eep depressing DOWN button until the seat is lowered to the
desired position.
C. B ackrest R eclining
K eep depressing B ackrest reclining button until the backrest is
reclined to the desired position.
D. B ackrest R aising
K eep depressing B ackrest raising button until the backrest is
raised to the desired position.
C aution
E . L egrest R aising (E X -Y M2NL A and E X -Y M2NR A only)
Move leg-rest lever to the left/right side for up-and-down.
F. Seat R otating
Make sure to raise the backrest by depressing P2 button
rotating the seat. Momentarily press L P button (L ock button)
releases the safety seat lock.
*T he lock is not released when backrest angle is less than 30°.
R otating the seat slowly by holoding the backrest.
Press L P button again to lock the seat at desired position.
<Warm-up mode>
Warm-up operation goes on at the extremely low oil tempera-
ture. It beeps for 3 minutes until this mode completes.
ON
UP
DOWN
DOWN
UP
B ack rest
reclining
S eat rotation lock
B ack rest raising
