background image

1

SWASH

Installation Instructions

Thank you for purchasing this Takara Belmont product.

The instructions contained in this booklet should 

be thoroughly read and understood before use. 

Using this product before reading this operating 

instructions may result in an accident.

This product is an industrial shampoo unit designed 

for barbers and hair salons. Only use this product for 

its intended purpose and do not use it for 

non-hairdressing work.

Keep this instruction and refer back to them when 

required.

Description of Warning Symbols  

Safety Precautions  

Dimensions  

Specifications  

Usage conditions  

Packaging  

Carrying the main body  

Installation of main body  

Installation process for anchor bolts  

Attach piping 

Checks after installation of pipe 

After installation  

Note 

 

2

2

3

5

5

6

6

7

7

8

8

9

9

Table of Contents

Please keep this manual in a safe place for your future reference

A PDF version of this manual can be downloaded at takarahairdressing.co.uk/download

To the installer

• The instructions should be thoroughly read and understood 

before installation to ensure that SWASH is installed correctly.

• After installation, give these instructions to the customer.

To the customers

• Customers must not install SWASH by themselves.

* The actual shape of SWASH and the images and 

dimensions listed in these instructions may be modified 

and are subject to change without notice.

Wash Unit 

June 2018     Version 5

Summary of Contents for Swash










Reviews: