3
Preparation before Installation
CAUTION
Do NOT apply weight or Do NOT hit a thing
on the equipment.
Avoid leaning on the glass, hard wiping of the glass
when cleaning.
This may cause deformation, breakage or falling accident
of the product.
Do NOT use the equipment outdoors.
This equipment is neither design for nor approved for
outside installation. If installed outdoors, there may be
a danger of a fire, electric shock, or failure.
Remove chemical immediately after attached.
If chemical such as hair dye, comes in contact with the
equipment, wipe it off immediately.This may cause
discoloration or deterioration.
Use this equipment at an ambient temperature
from 5°C to 35°C, and humidity from 45% to 85%.
When used at high temperature and high humidity, there may
be a risk of burnout damage, failure deformation discoloration.
Confirm the rated voltage and the power supply
voltage of the equipment.
If overvoltage is applied, a fire may start. Applying overvoltage
will shorten the life of the lamp.
Prior to installation, determine the installation position of the product referring to the
specification drawings
.
Provide a power supply (AC 230V) on the wall or floor.
z
z
Hold the glass carefully when moving the glass.
When attaching or detatching the glass, hold the glass securely.
If not, failing accident may occur.
z
Ask a licensed electrician to perform electrical work.
z
z
Perform Class D grounding (previous Class 3 grounding) with the ground wire.
Confirm the installation directions (up, down, right, left ) of the equipment.
