10
9 Attaching the Footrest [Styling Chair and Shampoo Chair]
Note: these drawings are for illustrative purposes only.
When assembling the footrest, do NOT use any hexagon head bolts or screws other than those provided by Takara
Belmont (located on the underside of chair top or are in a small bag taped to the footrest).
Note: Tighten the bolts by hand, check that they go in smoothly, and tighten them with wrench.
・
Ensure all bolts that come with the chair are used and tightened firmly.
It is dangerous to use fewer bolts or leave the footrest in a wobbly state.
The chair may be damaged, resulting in injury.
・
When attaching the footrest, be careful not to hit the chair and the
reclining handle with the footrest or wrench. The leather may tear or the
chair top and the reclining handle may become scratched.
CAUTION
Seat front
Seat rear
Screws
Screws
Screws
Seat rear
Seat front
Seat front
Seat rear
Attachment
positions x 4
Attachment
positions x 4
Attachment
positions x 2
10 Attaching the Footrest [Model No. 225]
(1) Attach
the footrest and tighten the footrest pins on the
both sides of the footrest by using a flat-blade screwdriver.
Note: Tighten the pin so that it will contact the footrest
firmly as shown in the right illustration.
(2) Fix the footrest pin tightly with a hexagon flat nut from
the opposite side of the footrest pin by using a 17 mm
wrench (do the same for both sides).
(3)
Fix the angle holder to footrest with a M8 x 20 bolt by
using a 14 mm wrench. (do the same for both sides)
Note: Tighten the pin so that it will contact the footrest
firmly as shown in the right illustration.
M8 x 20 bolt
Angle holder
Footrest pin
Hexagon flat nut
Footrest
Footrest pin
Footrest
Summary of Contents for Manual Barber chairs
Page 19: ...19...
