background image

Precautions for use

Always wipe and dry the floor if wet.

Wipe and dry the floor immediately if it is wet 

after shampooing. Failure to comply may cause 

deterioration to the floor surface or failure to the 

chair base.

In case of chemical spillage, wipe clean immediately.

Always wipe and dry the equipment after use.

Failure to remove moisture after use may cause 

malfunction to the equipment or result in 

unremovable smudges.

Do not forcefully lift up the main body or 

                                               backrest of the chair.

Failure to comply may cause malfunction or 

damage to the equipment.

Do not wipe with chemicals or apply heat.

Failure to comply may result in deterioration or 

discoloration. In case of chemical spillage on the 

leather-upholstered part or covers, wipe clean 

immediately.

Do not use in contact with a processor.

When using the chair in combination with a 

processor, carefully prevent contact between 

them. Failure to comply may result in discolored 

or deteriorated vinyl leather.

䖃㻌

To ensure safe use of the product, perform inspection according to the “Daily Inspection Guide” 

  on page 20 of this operating manual.

5

Do not leave leather or vinyl products, denims, 

                magazines, etc., on the leather-upholstered part.

Do not operate using more force than necessary.

Do not apply excessive force to the equipment 

or use more force than necessary for its 

operation. Failure to comply may result in 

damage to the equipment.

Keep pointy objects away from 

                                  the leather-upholstered part.

Contact with any pointy object may result in 

torn, scratched, or otherwise damaged leather.

Protect from exposure to direct sunlight or 

                 heat radiation from heating appliances.

Protect from exposure to direct sunlight or heat 

radiation from a stove and any other heating device. 

Failure to comply may result in discolored, 

deteriorated, deformed, or degraded leather. Avoid 

use on a heating appliance such as an electric 

carpet. Failure to comply may result in fire.

Do not use outdoors.

This product is for indoor use only. Do not install 

outdoors or in vehicles. Always use inside a 

barbershop or a beauty salon. Failure to comply 

may cause malfunction or damage to the 

equipment.

Do not apply excessive force to the edge of 

                     the backrest or that of either armrest.

Do not apply excessive force to the edge of the 

backrest or that of either armrest to turn or move 

the chair. Failure to comply may cause 

deformation or damage to the equipment.

CAUTION

Prevent close contact of the leather-upholstered part 

(backrest, seat, and armrests) with other leather products 

(handbags, etc.), vinyl products, copy paper sheets (print 

side), or print publications (books and magazines). Failure 

to comply may cause the dye or ink to migrate and adhere 

fast. Use sufficient care with handbags, denims and other 

clothes, and magazines among other things (potential color 

migration from customers’ leather products, synthetic 

leather clothes, etc.).

In case of spillage of hair dye or any other 

chemical, wipe clean immediately. Failure to 

comply may result in discoloration, deterioration, 

or deformation. In case of chemical spillage on 

the floor, wipe clean immediately. Note that hair 

dyes have a very strong coloring power. Hence, 

wiping immediately after spillage may fail in 

complete removal and leave tint behind.

Summary of Contents for CLIPPER AY-CLIP





















Reviews: