Takahashi FOA60-K Instruction Manual Download Page 11

- 11 -

Finder Adjustment

In the view field of a telescope, the image 

is seen highly magnified so it is so difficult 

to get a desired object in the field of view. 

Also when photographing an object with a 

camera, the image of the object on the focal 

plane is so dark it makes it difficult to center 

in the field of view. A finder is a useful tool. It 

permits the precise centering of an object in 

the field of view. The wide field of the finder 

can find an object easier in the view field. 

Therefore, it is important that the finder and 

the telescope be in alignment.

Focusing

When you see some objects far away, if the 

finder is not focused, adjust the finder as 

follows.
1.  Loosen the lock ring.

2.  Viewing some objects far away, hold the 

eyepiece and focus the finder by turning 

the  eyepiece  clockwise  and  counter-

clockwise.

3. When focused, tighten the lock ring.

Finder Alignment Procedures

1.  Set  up  the  telescope  for  visual  use 

according to the system chart and attach 

a low power eyepiece. Then, select a 

clearly noticeable object far away and 

center it in the view field.

2.  Then,  change  the  eyepiece  to  a  high 

power one and again center the object in 

the view field. Then, lock the telescope.

3.  Looking  through  the  finder,  move  the 

finder  with  the  following  method  and 

adjust it so the object is centered at the 

crosshair.

4. Turn all the lock nuts until they reach the 

head of the adjusting screw.

5. In order to move the crosshair in the 

direction of the arrow, first loosen the 

screw (a) and tighten (push) the finder 

with the screw (c). Next loosen the screw 

(b) and tighten (push) the finder with the 

screw (c). This procedure will move the 

crosshair in the desired direction. The 

top of the finder will move in the opposite 

direction and the object will move in the 

direction of the smaller arrow.

6. Turn all the lock nuts until they reach 

the finder bracket and lock the adjusting 

screw.

a

b

c

Field of View of the Finder

Crosshair

Field of View of

the Main Telescope

Finder Bracket

Finder Adjusting Screw

Lock Nut

Focus Lock Ring

Eyepiece

Lock Screw

Finder

Summary of Contents for FOA60-K

























Reviews: